Bearings, Bushings and Thrust Washers

Reduce Downtime and Provide Maintenance-free Operation

GRAPHALLOY® bearings, bushings and thrust washers are self-lubricating and eliminate time-consuming, costly maintenance. GRAPHALLOY materials are impervious to temperature extremes (from -400° F to +1000° F/-240° C to 535° C) and thrive in harsh environments where other bearings fail.

GRAPHALLOY standard and custom designed products provide lifetime cost savings and significant operating advantages over conventional bushings and bearings.

Let us solve your immediate problem: call, email or use our inquiry form  


  General Purpose Bushings Type 117

A complete size range of standard "off the shelf" solutions. These self-lubricating bushings provide maintenance-free service in temperatures to 750°F (400°C). Available in FDA accepted grades.

Graphalloy General Purpose Bushings
  High Temperature Bearings Type 453

GRAPHALLOY high temperature bushings are self-lubricating and do not contain oil. They provide long life in high temperature applications such as industrial ovens, conveyors and overhead paint lines. Standard sizes will fit common overhead paint line conveyors used in high temperature drying ovens.

Graphalloy High Temperature Bushings
  High Temperature Thrust Washers Type 553

These thrust washers proide a high temperature solution for thrust loads in conveyor bushings, traction wheel bushings, pillow blocks and similar applications.

Graphalloy High Temperature Thrust Washers
  Flange Type Bushings Type 317

These easy-to-mount standard flange bushings are used widely throughout the industry. They are available in grades to provide solutions to the most difficult bearing problems. These flange bushings are designed to handle both radial and thrust loads.

Graphalloy Flange Bushings
  Block Type Bushings Type 217

GRAPHALLOY block bushings provide solutions for submerged applications. They are used primarily in the textile finishing industry in dye and bleach ranges, wash boxes and dye jigs to replace cast iron, plastic or stainless steel bushings.

 Graphalloy Block Bushings
  Split Double Flange Bushings Type 1017

As with all GRAPHALLOY bushings, these split double flanged bushings will survive harsh environments. They are commonly used in screw or spiral conveyors or feeders to move a large variety of bulk materials. They are also used in batch mixers and in agitators. Since GRAPHALLOY never equires lubrication, the conveyed product is not contaminated and does not collect in the bearing.

Graphalloy Split Double Flange Bushings




Let us solve your immediate problem: call, email or use our inquiry form  

GRAPHALLOY® outperforms ordinary graphite bushings and bearings. Click here to learn more

High Temperature Bearings for Ovens, Conveyors, Furnaces and Dryers

Learn more about the benefits of GRAPHALLOY 

Receive a GRAPHALLOY design solution from one of our engineers

Request literature about GRAPHALLOY